CDL General Knowledge Practice Test 5

24 free CDL General Knowledge practice questions with answers and explanations. Choose an answer to check it right away and read why. You need at least 80% correct to pass the real test.

1.What is the most important reason to inspect your vehicle?

  1. To avoid fines
  2. To keep company records up to date
  3. Safety for yourself and other road users
  4. To save fuel
Show answer

C. Safety for yourself and other road users

Safety is the most important reason you inspect your vehicle: safety for yourself and for other road users. Federal and state laws also require drivers to inspect their vehicles.

CDL manual, section 2.1.1.

2.When should you do an after-trip inspection?

  1. Only once a week
  2. At the end of the trip, day, or tour of duty on each vehicle you operated
  3. Only when a part breaks
  4. Only before the first trip of the month
Show answer

B. At the end of the trip, day, or tour of duty on each vehicle you operated

Do an after-trip inspection at the end of the trip, day, or tour of duty on each vehicle you operated.

CDL manual, section 2.1.2.

3.A vehicle inspection report helps the motor carrier know:

  1. How fast you drove
  2. How much fuel you used
  3. Your hours of service
  4. When the vehicle needs repairs
Show answer

D. When the vehicle needs repairs

The inspection report helps a motor carrier know when the vehicle needs repairs.

CDL manual, section 2.1.2.

4.During a trip, you should check for vehicle problems by:

  1. Using your senses: look, listen, smell and feel
  2. Waiting for a warning light
  3. Checking only at the end of the day
  4. Calling your dispatcher every hour
Show answer

A. Using your senses: look, listen, smell and feel

During a trip, watch your gauges and use your senses (look, listen, smell, feel) to check for problems.

CDL manual, section 2.1.2.

5.As you approach the vehicle during an inspection, look under it for:

  1. Loose cargo straps
  2. Fresh oil, coolant, grease or fuel leaks
  3. The registration papers
  4. Tire tread depth
Show answer

B. Fresh oil, coolant, grease or fuel leaks

Look under the vehicle for fresh oil, coolant, grease, or fuel leaks.

CDL manual, section 2.1.5.

6.If the drive wheels begin to spin while you accelerate, you should:

  1. Press harder on the accelerator
  2. Shift to a higher gear quickly
  3. Take your foot off the accelerator
  4. Pull the parking brake
Show answer

C. Take your foot off the accelerator

If the drive wheels begin to spin, take your foot off the accelerator. Speed up very gradually when traction is poor.

CDL manual, section 2.2.1.

7.Which of these is a rule for backing safely?

  1. Use the highest reverse gear
  2. Back quickly to spend less time in traffic
  3. Never use a helper
  4. Use the lowest reverse gear
Show answer

D. Use the lowest reverse gear

Avoid backing whenever you can. When you must back, use the lowest reverse gear and use a helper whenever possible.

CDL manual, section 2.2.4.

8.Most heavy vehicles with unsynchronized manual transmissions require:

  1. Double clutching to change gears
  2. Shifting only while stopped
  3. Shifting without using the clutch
  4. Shifting only above 40 mph
Show answer

A. Double clutching to change gears

Most heavy vehicles with unsynchronized manual transmissions require double clutching to change gears. A synchronized manual transmission does not.

CDL manual, section 2.3.1.

9.When should you downshift for a curve?

  1. In the middle of the curve
  2. Before entering the curve
  3. After leaving the curve
  4. Only if the curve has a posted speed
Show answer

B. Before entering the curve

Slow down to a safe speed and downshift to the right gear before entering the curve.

CDL manual, section 2.3.1.

10.With an automatic transmission, it is very important to use the braking effect of a lower gear range when:

  1. Parking
  2. Starting on flat ground
  3. Going down grades
  4. Cruising on a flat highway
Show answer

C. Going down grades

The manual says it is very important to use this braking effect when going down grades.

CDL manual, section 2.3.3.

11.When should you check your mirror adjustment?

  1. Once a month
  2. Only after a crash
  3. Only when driving at night
  4. Before the start of any trip
Show answer

D. Before the start of any trip

Check mirror adjustment before the start of any trip.

CDL manual, section 2.4.2.

12.After you signal a lane change, check your mirrors to make sure:

  1. No one has moved into your blind spot
  2. Your turn signal bulb works
  3. Your cargo cover is still on
  4. The road ahead is clear
Show answer

A. No one has moved into your blind spot

Check your mirrors before you change lanes to make sure there is room, and again after you signal to check that no one has moved into your blind spot.

CDL manual, section 2.4.2.

13.When you turn, you should signal:

  1. Only as you begin the turn
  2. Briefly, then cancel it so both hands are free
  3. Early and continuously until you have turned
  4. Only if a vehicle is behind you
Show answer

C. Early and continuously until you have turned

Signal early, well before you turn, and signal continuously. Turn the signal off after you have turned.

CDL manual, section 2.5.1.

14.How can you warn drivers behind you that you are slowing down?

  1. Turn on your taillights
  2. Tap the brake pedal lightly a few times to flash the brake lights
  3. Wave your arm out the window
  4. Sound the horn
Show answer

B. Tap the brake pedal lightly a few times to flash the brake lights

A few light taps on the brake pedal flash the brake lights and warn following drivers.

CDL manual, section 2.5.1.

15.Four-way emergency flashers should be used when you are:

  1. Passing another vehicle
  2. Changing lanes
  3. Driving at night at normal speed
  4. Driving very slowly or stopped
Show answer

D. Driving very slowly or stopped

Use the four-way emergency flashers when you are driving very slowly or are stopped.

CDL manual, section 2.5.1.

16.Some drivers signal to others that it is safe to pass. According to the manual, you should:

  1. Do it, as a courtesy
  2. Not do it, because you could cause a crash
  3. Do it only on two-lane roads
  4. Do it only at night
Show answer

B. Not do it, because you could cause a crash

Do not direct traffic by signaling others to pass. You could cause a crash.

CDL manual, section 2.5.1.

17.When it is legal, how can you let a driver you are passing at night know you are there?

  1. Hold down the horn
  2. Turn on your four-way flashers
  3. Flash your lights from low to high beam and back
  4. Turn your headlights off briefly
Show answer

C. Flash your lights from low to high beam and back

When it is legal, tap the horn lightly or, at night, flash your lights from low to high beam and back.

CDL manual, section 2.5.2.

18.In a curve, you should be in a gear that lets you:

  1. Accelerate slightly
  2. Coast in neutral
  3. Brake hard
  4. Shift up halfway through
Show answer

A. Accelerate slightly

Slow to a safe speed before the curve, never exceed the posted speed for the curve, and be in a gear that lets you accelerate slightly in the curve.

CDL manual, section 2.6.3.

19.You should always be able to stop within:

  1. 100 feet
  2. The length of your vehicle
  3. The distance you can see ahead
  4. 4 seconds of travel
Show answer

C. The distance you can see ahead

Always be able to stop within the distance you can see ahead. When you must use low beams, slow down.

CDL manual, section 2.6.4.

20.According to the manual, the most frequent cause of hitting the vehicle ahead is:

  1. Brake failure
  2. Following too closely
  3. Bad weather
  4. A tire blowout
Show answer

B. Following too closely

The most frequent cause is following too closely. Keep enough space ahead of you.

CDL manual, section 2.7.1.

21.When you are being tailgated, which statement is true?

  1. You should speed up to get away
  2. You should flash your brake lights at the tailgater
  3. You should turn on your taillights
  4. It is safer to be tailgated at a low speed than a high speed
Show answer

D. It is safer to be tailgated at a low speed than a high speed

It is safer to be tailgated at a low speed than a high speed. Don't flash your brake lights or turn on your taillights to warn the tailgater.

CDL manual, section 2.7.2.

22.Clearance heights posted at bridges and overpasses:

  1. Are always exact
  2. Should not be assumed to be correct
  3. Apply only to empty vehicles
  4. Can be ignored at night
Show answer

B. Should not be assumed to be correct

Don't assume the heights posted at bridges and overpasses are correct. The weight of a cargo van also changes its height.

CDL manual, section 2.7.4.

23.Before you back into an area, you should get out and check for:

  1. Overhanging objects such as trees, branches or electric wires
  2. Parking meters
  3. Your fuel level
  4. Your logbook
Show answer

A. Overhanging objects such as trees, branches or electric wires

Before backing into an area, get out and check for overhanging objects such as trees, branches, or electric wires.

CDL manual, section 2.7.4.

24.If there are two left-turn lanes, you should use:

  1. The left-hand lane
  2. Whichever lane is shorter
  3. The right-hand lane
  4. Either lane
Show answer

C. The right-hand lane

If there are two turning lanes, always take the right turn lane. Make sure you reach the center of the intersection before you start the left turn.

CDL manual, section 2.7.6.

All General Knowledge practice tests · Next: Practice Test 6 · Review my mistakes

Questions written by CDL Quiz Prep and checked against the CDL manual (November 2026). Manuals can differ slightly by state. Found a mistake? Report an error.